Come and see our offers on Workwear!

Free Shipping on orders over £80

Check back soon for more deals!

Axle Stand Set 2pce

Axle Stand Set 2pce - Maximum Load: 3000kg
Stock Status : In Stock
Product Code : ST763621
Product Brand : SILVERLINE
Product Condition:   New
Size

£14.12

£16.94 inc. VAT

Silverline Axle Stand Set 2pce

Ratchet action for quick height adjustment. Rated and sold in pairs.

Available in 3 tonne and 6 tonne options. 

General Safety • ALWAYS inspect for damage before use, and check safety of locking device
• DO NOT use axle stands that have been damaged
• ONLY use on hard, even ground Note: It is recommended to use axle stands on concrete floors, and NOT on tarmacsurfaces
• ALWAYS secure the vehicle against moving
• ALWAYS check jacking points are in good condition
• NEVER exceed maxload capacity(see ‘Specification’)
• DO NOT use single axle stands; always use as a pair
• DO NOT use four axle stands on one vehicle
• DO NOT use for trailers or three-wheeled vehicles
• DO NOT lift one end of a vehicle if the other end already rests on an axle stand
• DO NOT work under lifted vehicles

Operation WARNING:
ALWAYS refer to the vehicle manufacturer’sinstructions forcorrect jacking procedure.
1. Lift the vehicle with a suitable jack or lifting device
2. Position the axle stands under the recommended jacking points
3. Adjust the axle stands by holding the Locking Lever (2) up,while lifting the column to the required height
4. Lock the column by pushing the Locking Lever down firmly WARNING: Ensure the pawl issecurely engaged with the column teeth.
5. Gentlylower the vehicle onto the axle stands, ensuring the load sitsin the centre of the Saddles(1) and that the axle stands are in a stable position

WARNING: NEVER load the axle stands off-centre, asthiscan lead to extremely dangeroussituations with the potential of severe injury or loss of life. Maintenance
WARNING: NEVER make any modificationsto the axle stands orcomponents and DO NOT attempt any kind of repairs. Damaged axle stands must be removed from service immediately.
• Inspect before and after every use and check for visible damage, deformation and corrosion. Inspect welds and test locking mechanism
• Clean with a soft, drycloth. If contaminated with oil or grease, use a mild detergentsolution, then rinse and dry thoroughly before storage
Storage
• Store carefully in a secure, dry place out of the reach of children

Min. height:...............................................285mm
Max. height:...............................................420mm
Saddle:.......................................................70mm
 

Write an online review and share your thoughts with other shoppers!

Be the first to review this product

Copyright The Toolbox Scotland All rights reserved.
×

Can't find what you're looking for? Search Here or get in Touch!


×