Rockler

Inserts for router bit storage in benches and racks for a neat, clean storage solution. Moulded polyethylene construction helps keep out moisture and prevent rust

includes three sets of interchangeable tips that let you check diagonals for square, transfer measurements and even scribe circles, excellent for cabinet makers.

One easy squeeze is all it takes to clamp a wide variety of edging profilessmaller size is ideal for thinner stock and delicate moldings.

Measuring gauge in durable black plastic with easy-to-find white measurement markings. Helps to set calipers accurately to any 1/8" increment between 0 and 5".

Rockler Clamp-It® Assembly & Corner Square

The Clamp-It® replaces custom clamping jigs, acts as a third hand, and eliminates the need for long bulky clamps

Premium-grade clamping system, compatible with and automatically centring pressure on edge of Clamp-It® Assembly Square (sold separately).

Struggling to hold cabinet parts in alignment while driving fasteners can be an exercise in frustration, and if you're using a nail gun, downright dangerous

Ideal for sanding both inside and outside curves on moldings, dowels, edging, fluting and more.

Drop-off platform for use with 13mm (½) thick cross cut sleds. Sturdy MDF with wipe-clean melamine coating.

Securing drawer fronts to their drawer boxes can be a challenge, but it's a challenge these clamps are more than up for.

The fence features adjustable MDF faces that let you straddle large forstner bits and sanding spindles, plus a flip-down stop for precise placement of a wide variety of holes

Flexible rubber port adaptors easily conform to irregular-shaped ports. Smaller inside diameters fit the dust hose onto an even wider variety of tools and the opposite end of each port threads securely into the stretch house

Excellent dust extraction system for lathe wood turners.

Flexible rubber boot on one side guarantees tight connection and allows slight variations in the size of the tool's dust port.

Excellent dust extraction system for lathe wood turners.

Attachments made from easy-to-clean materials: HDPE plastic, polypropylene, silicone and thermoplastic rubber. Includes standard glue spout, silicone brush for wider boards, roller for very wide boards

Easy-to-clean plastic glue bottle and spout. Nozzle can be cut to set flow rate, while sealing cap prevents tip clogging up.

The Rockler Lathe Chip Deflector helps to redirect chips and debris away from the turner's hands, arms, torso and face

Carbide tipped for long lasting performance and clean 35mm holes. 9.5mm (3/8") diameter shank.

Magnetic Cord Keeper has a 5/16" opening that holds a standard-thickness power cord and keeps it right where you can see it.

Provides stable footing to prevent Clamp-It® Bar Clamps falling during glue-up. Attachments snap securely onto both ends of clamps (sold separately)

Solid phenolic resin plate and plastic insert ring. Makes lifting router from table more convenient for comfortable bit changes

Compatible with Triton routers JOF, MOF and TRA. 10mm (3/8) thick. Plate measures 210 x 298mm (8-1/4 x 11-3/4'').

Rockler Precision Brass Set-Up Bars - Master Set 11pce ideal tool for setting table router and saw blade cutting depth.

Strong, lightweight construction allows easy clamping and surface alignment of pocket hole joints while the streamlined, ergonomic design enables efficient, comfortable handling

Transparent guide runs along the fence 51mm (2'') above the table, to enable compatibility with most router table fences and prevent cutting into the sled.

Center/Offset Marking Tool straddles your board to mark a perfectly centered line along the face or edge of boards up to 1-1/2'' wide or thick

Sturdy plastic inserts can be interchanged to ensure the bit opening is as close to the router bit diameter as possible.

Durable MDF platform with low-friction melamine coating for easy sliding. Solid brass indexing keys ensure uniform spacing and tight finger joints.

Router table jig for cutting simple and decorative spline slots in boxes. MDF router base with high-grade plastic sled.

Creates level and secure shelves with compact, portable construction including index pin and self-centring drill bit

Ideal for making clean, fibre-free holes and suitable to use with Rockler JIG-IT templates for shelf pins or cribbage templates .

For use with plunge router. Twin fluted. 3/16" router bit compatible

Easy-to-clean silicone bristles quickly shed dried glue for a long service life.

Protective project mat made from heat-resistant, easy-to-clean silicone. Wet glue rinses off and dried glue peels off.

Rockler Small Piece Holder keeps your fingers out of harm's way and securely holds your smallest work pieces while you machine them at the router table.

For use while assembling drawers to create perfectly square batch. Also great for cases, frames and more

Simplifies cabinet layout and repeated transfer of measurements to cabinet parts

Aluminium with melamine-coated MDF. Great for cutting dowels, tenon stock and small mouldings at a precise 90° angle

Reduces risk of kickback, splintering and breakage.

Simple, indexed angle-setting system; heavy duty, non-marking clamps and smooth sliding design for fast, easy, more accurate tapered cuts.

Indispensable and easy to use kit includes the original Clamp-It® Assembly Square constructed from durable, rigid polycarbonate and two 4 x 127mm (5") Clamp-It® Bar Clamps

Rockler Universal Drawer Slide Jig is the ultimate aid for installing drawer slides of almost any type, including ball-bearing or epoxy-coated side-mount slides and even center-mount slides

Works great for table saws, band saws, cutoff saws, router fences and more!

Aluminium jig track with unique stacked-slot design. For building matching jigs, repetitive cut set-ups and adjustable stops.