Made from European beech, this bench is built to last a lifetime of normal use. A double row of 19mm (3/4") dog holes run from each of the four vice locations, giving an endless opportunity to clamp your work. Scandi Plus benches can also be fitted with the cupboard and drawer module (SM03) and cupboard and shelf module (SM07). Worktop area: 1,326 x 580mm.Please note: Sjobergs benches are kiln dried to 8% moisture content. If your workshop is not a humidity controlled environment and can exceed 75% air humidity, Sjobergs recommends sealing the bench with 2 or 3 coats of finishing oil on the top, underside and dog holes. This treatment should be maintained from time to time.
- Scandinavian beech worktop
- Hard wearing and tough
- Double rows of dog holes for versatility
- Steel vice spindles, up to 1,300kg force
- Can be fitted with modules SM07 or SM03
|Specification for Sjobergs Scandi Plus 1425:
||Scandi Plus 1425
|Overall L x W x H
||1,453 x 580 x 900mm
|Thickness of Top
Taking care of your Sjöbergs workbench!
CONGRATULATIONS ON YOUR CHOICE OF A WORKBENCH FROM SJÖBERGS! If you take proper care of it, it can be used for generations. Here is some advice to ensure that your bench works to your complete satisfaction.
HERE ARE SOME POINTS TO KEEP IN MIND!
FOR THE GUARANTEE to be valid and for a longer life of your workbench, all movable parts must be greased with tallow and adjusted regularly.
Melt the tallow in a pan or use an immersion heater. Use a brush for greasing, see illustration.
Your workbench must not be handled abnormally or stored in damp surroundings.
A bench with a shoulder vice is equipped on the underside with 2 adjustment options. One can be used to prevent too much play at the shoulder vice mounting point and the other is for vertical adjustments of the shoulder vice slide. Use these when applicable.
Providing the bench with jaw protectors to both shoulder and front vice protects the bench.
Check that all bolts have been tightened. A bolt which isnt tight can in time cause fractures of the glued sections.